Greenair Cyclestat 4P-1 Repeat Cycle Timer

The Cyclestat 4P repeat cycle timer optumizes accurate short cycle timing.
Many use the cycle time technique for accuratly timing the GREENAIR ELECTRA BURNER say 5-15 minute burns hourly , The Photoperiod Sensor will cut off the power to the Burner when lights off which is desirable,

Either using the GREENAIR CT-DH3-1 for tthermo and humidistat Control Of VENT FANS or Alternativly anothe rmethod is to use Another CYCLESTAT 4P-1 that is synched to VENT for a period of 5-10 mins per hour prior to the Burner firing on its cycle.
 No programming required. Easy to set and operate.
 Microprocessor time counter with adjustable frequency and duration.
The Cyclestat 4P timer has many uses. Only a few of them include: fogging or misting, spray stakes or drip system timing, air pumps, CO2 equipment and intake or exhaust fan control. The Cyclestat may be set for interval and cycle of timed events. Interval is the time between the "On" and "Off" cycles. The interval knob may be set from 5 minutes to 8 hours. Set this for desired time between functions. Cycle is the length of time that a specific function or condition must be maintained. Cycle may be set from 5 seconds to 30 minutes.