Trolmaster Tent X Control System CO2 Package

The Tent-X system is the finest CO2 system we can find From the USA. This package has the minimum controls/modules needed for a semi closed room CO2 setup. The system uses Ethernet cables to connect the different sensors and Link to The “Interweb” , making it easy to connect the extra modules available from TrolMaster. This system has been very successful with our CO2 setups!

Follow this link to see all other modules/accessories available on the

This Package Includes:

TrolMaster Tent-X (TCS-1)  – Link – Is a state-of-the-art professional-grade and a  modular designed environmental and irrigation control system, designed for single-zone grow tents.

Thanks to the controller’s compact hydroponic capabilities, it allows the user to effectively control their tent’s environmental parameters and irrigation schedule with a single control system.

It comes with a 3-in-1 temperature, humidity, and light sensor, the MBS-TH.

Users can daisy-chain the MBS-TH sensor with the CO2 sensor (MBS-S8), the full spectrum quantum sensor (MBS-PAR), and the smoke and water detectors into the TCS-1’s SENSOR port.

Users can also connect an AMP-3 sensor board to the Tent-X, and connect the Water content sensors (WCS-1/2) or the WD-1 water detector to the sensor board. Additionally, the TCS-1 supports the connection of up to four DS-type plug-in control models, allowing you to connect devices that can control the environment and irrigation.

The TCS-1 is the brain that unites all your climate control and irrigation devices into one being, allowing your devices to work together to create the optimal growth environment for your plants.

CO2 Sensor – MBS-S8

Link

The  CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules.

“Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors”

CO2 Station DSC-2A -(Aussie socket)

Link

The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.

LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.