Autopot HydroPak Starter Kit

The Autopot Hydropak Starter Kit consists of everything you need to start growing effortlessly with hydroponics.

• Works by gravity
• Easy to use. No need to check for conductivity (EC) & acidity (pH) daily.
• Accurate watering with no run-off at all. Saves water and nutrients.
• Can be left unattended for weeks.
• Simply “add-a-tee” to attach more planter systems to the same reservoir later.
• Be amazed at the speed your plants grow!

Autopot Hydropak components

• 1 Smart-valve
• 1 grow tray/lid
• 2 x 250mm (10 inch) pots
• 2 litres of nutrients A/B
• 8 litres of perlite/vermiculitre mix
• 1 x 35L Reservoir – Water tank has a very small area – just 32 x 22cm.
• 1 x 4mm filter
• 2m x 4mm tubing
• 2 x root control mats
• Instruction booklet

Autopot systems let individual plants determine the amount and frequency of watering via the use of the Autopot Smart Valve. This takes away any guesswork allowing each plant to flourish in optimal growing conditions.

The Smart-Valve works by restricting the flow of water (or nutrient) into the tray until it has nearly all fully drained. At this time, the smart valve opens and allows fresh water to fill the tray again. This wet – dry cycle is similar to what occurs in nature with rainfall and the dry periods in between.

There is no need for pumps, as each AutoPot system uses a simple gravity feed method, and the range of applications AutoPot can be used in is immense – from a single plant to huge commercial situations.

Each system is controlled by a “Smart Valve” which works in three different step